Laser Ablation Transfer Technology

Laser Ablation Transfer (LAT) Technology applies the ink pigment directly onto the chosen printing stock — as is done on the printing press itself. This process accounts for the low optical gain values associated with the Prediction system. There are no adhesives or heavy pigment thicknesses to alter the image. When dot gain curves are similar, make-ready times on press are greatly reduced. This can result in significant cost savings in the pressroom.

This is a diagram of how our patented LAT Technology works:

click on picture for larger view

It is worth noting that the image spot size for the Prediction system is very precise — only 10 microns wide, as compared to much larger image spot sizes for competing proofing products. In addition, the proof is protected by an ultra-thin clear finish — only 4 microns thick! This allows the Prediction system to maintain the minimum dot gain so that matching the proof on press is more reliable and predictable than ever.

click on picture for larger view

The matrix shown below provides a side by side comparison of proofing criteria. The Prediction system compares favorably on all counts.

click on picture for larger view

The above is taken from the technology white paper Proofing the Point.

Click the icon to download the full
Proofing the Point White Paper